This product is no longer promoted on Made-in-China.com. If you find any infringement or
sensitive information of it, please contact
us for
handling. Thank you.
Prefab Container House USA Prefab Prefabricated Luxury House Villa
Paint, PVC cladding, carved metal board,wall tile, etc.
Interior Wall Decoration
Paint, bamboo fiber board.
Accessories
Rivet, screw, glue, etc.
Veranda, Garage and fence can be customized as required.
Acceptable Customization.
Introduction of EPS cememt sandwich panel
EPS (expanded polystyrene board) cement wall panel is filled with polystyrene EPS, cement and sand, to form a non-load-bearing light-weight composite wall panel. The wall panels on both sides are 5mm calcium silicate board, with the advantages of lightweight, economic, environment-friendly, energy-saving, anti-earthquake, fireproof, waterproof, sound Insulation, heat preservation, enlarge using area, easy and fast Installation, recycling use.
And 2440mm(Length)*610mm(Width)*75/90/100/120/150(thickness) sizes for optional.
Usually, we suggest to use 75mm thick for simple partition, 90~100mm thick for inner wall partition, 120~150mm thick for outer wall partition.
Feature of EPS cement sandwich panel
1.Hightweight the economic benefits,reduce project cost.
The light energy-saving composite wall plate is made of industrial residue fly ash, calcium silicate panel, ceramsite, silicate cement and EPS foam particles as main raw materials, the production process is simple, the cost is low, and the economic benefit is considerable.
2.Advanced technology level.
The industrialization of housing construction in this century has become irreversible. According to the analysis of the development of wall materials in developed countries, the product is in accordance with the development law, which overcomes the defects of other light wall panels and has unique performance, and will be the leader of the new wall material.
3.Lightweight,optimize structures.
A.Traditional brick block, the wall must be located in the vertical position on the beam to adopt.
B.Zhongjingtai wall material, which can widen the distance between beams and columns, highlight the economic benefit of mining Jingtai wall material.
C.The wall can not be restricted by beam and column.
4.Sound insulation.
Lightweight sandwich panels have good sound insulation,it is 40dB for 90mm thick wall and much better for thicker panels,the sound effects in the line with national residential sound requirements,much higher than other excuses brick wall of sound effects.
5.Waterproof.
The light partition board can be filled with cement to form a pool body without making any waterproof decoration. The back of the light partition panel can persist in dryness, leave no trace, and will not show condensed water droplets in a humid climate. Light partition panel is a professional waterproof board, with good waterproof, moisture-proof performance, can be applied to kitchen, cleaning room, basement and other wet areas.
6.Easy to construct,transport and tim esaving.
Brick masonry construction capacity of 12 individuals for eight hours a day,if use EPS cement wall panel in construction,three people could complete in 60 minutes,so efficiency advantage is very significant
Application of cement sandwich panel
It can be used as both interior and exterior partition walls or all kinds of decoration and building construction, and also the best materials for plants, apartments, hotels, office buildings and public constructions, etc.
In addition, they are used for compartments, households, bathrooms, the interior partition walls of kitchens. Our Service:
-Quotation according to yours drawing -Design and quotation according to yours requirements -Delivery the entire steel building to you by containers; -Offer all the detailed drawings for installation and fabrication.
Our excellent design team will design the steel structure workshop/warehouse
for you.Please offer us the following information, then we will give you a satisfied drawing.
1. Location (where will the building be built? ) _____country, area. 2. Size: Length*width*height _____mm*_____mm*_____mm. 3. Wind load (max. Wind speed) _____kn/m2, _____km/h, _____m/s. 4. Snow load (max. Snow height,if it has)_____kn/m2, _____mm. 5. Layout: How many rooms are needed? Their purposes? FAQ:
1. Q: What kind of company you are, factory or trade company? We are a manufacturer of prefab house,container house,warehouse, villa and so on, and our factory located in Quanzhou, Fujian Province. 2. Q: What could we provide for your steel structure building? A: According to customers requirements, we could provide the main steel frame, roof floor decks, wall panels, doors and windows, sanitary appliance, tiles, ceiling and so on. 3. Q: How can I get the quotation of the project? A: If you have drawing, we can offer you our quotation according to your drawing. If you have no design, please provide the details, such as location, wind speed, dimension, material or other requirements, we could make the design and quotation according to your specification. 4. Q: How about your quality control? A: We have got related quality control certificates. All the products processing including cutting, welding, bending, shot blasting, packing, storing, loading have strict quality control to ensure qualified products. 5. Q: What about the installation? A: We would provide installation instruction for you, and technicians also could be sent to help you if it is necessary. However, the visa fee, air tickets, accommodation, and wages will be charged by the buyers.
